Camera Autofocus and Why You Need FoCal

Autofocus behaviour

Even with a perfect setup (bright light, a high-contrast target and a solid tripod), autofocus doesn't land in exactly the same place every time.

Every focus operation passes through the lens optics, the AF sensor or AF pixels, the AF processor and the lens motors. Each has a little inaccuracy, and camera makers trade accuracy against speed. If each part were perfect 95% of the time, the whole system would be perfect only about 70% of the time.

You can see this for yourself: take 10 shots of a static target from a tripod, defocusing the lens between shots, and compare them at 100%. Most likely only 6 to 8 of them are equally sharp.

This matters for calibration in two ways:

  • The shot-to-shot error can be bigger than one focus adjustment step, so a handful of test shots can easily point to the wrong value. FoCal takes many shots and models the results to find the right one.
  • Focus adjustment can't fix random errors, only the constant offset. FoCal's AF Consistency test measures how repeatable your autofocus is.

For more on where these errors come from, see The AF processor: when there's no time to check and The lens: optics, motors and factory data on our website.

Continue on to How does FoCal help?