AF Consistency

Settings – AF Consistency

On this page

The Settings tab holds the AF Consistency Test Settings. The defaults suit most uses.

Aperture

The aperture at which FoCal takes and measures the shots. The default is Widest.

This may not change the aperture the camera focuses at. Most DSLRs focus with phase-detect autofocus with the lens wide open, then stop down to take the shot. In live view, and on mirrorless cameras, whether the camera focuses wide open or at the shooting aperture depends on the camera and its settings.

If FoCal shows "No aperture list reported by the camera", set the camera's exposure mode to Aperture Priority (A or Av).

Autofocus Mode

How the camera focuses for each shot. The options depend on the camera:

  • Phase Detect: the viewfinder autofocus system of a DSLR, or the camera's normal autofocus.
  • Live View AF: autofocus in live view.
  • Both: for cameras with both systems. FoCal measures each point twice, once with each system, so you can compare them in one test.
  • None: the camera doesn't autofocus.

Phase-detect results depend on how well the lens is calibrated. For a representative result, calibrate the lens before you run this test.

On a DSLR, choosing Live View AF shows how repeatable live view focusing is. Comparing it with Phase Detect shows how the two systems compare.

Point Count

The number of measurements to take, from 1 to 100. The default is 10. With Both selected for Autofocus Mode or Defocus Direction, each measurement takes more than one shot.

More points give a more reliable result but take longer.

Defocus Amount

How far FoCal moves the focus away between measurements, so the camera has to refocus each time: None, Small or Large. The default is Large.

Defocus Direction

Which way FoCal moves the focus: Towards Infinity, Towards Camera or Both. The default is Towards Infinity. Both measures each point twice, once from each direction. This setting is disabled when Defocus Amount is None.

Changing the defocus settings can reveal how the autofocus system behaves, for example whether it lands differently when focusing from near or from far. Unless you know what you are looking for, leave them at Large and Towards Infinity.