Aperture Sharpness

Image Motion – Aperture Sharpness

On this page

(See Chart Features for general chart features - changing scales, copying to clipboard etc)

What this shows

The Image Motion chart shows how far the image of the FoCal target moves on the sensor during the test. In Aperture Sharpness, the aperture changes between shots, so this chart can reveal problems with the aperture mechanism or loose optics.

How to read it

  • Horizontal axis: aperture, wide open on the left.
  • Vertical axis: absolute motion, in pixels (0 to 25). This is a distance only, with no direction.

Key:

  • Green circles: the image motion for each shot, measured from the target's average position during the test.
  • Green line: joins the shots.
  • Red vertical line labelled DLA: the diffraction limited aperture for your camera.

What good looks like

  • Movement well under a pixel or two across the whole range. The example above is a good result, typically less than a single pixel.
  • As a guide, FoCal scores a median below about 0.7 pixels as excellent, below about 1.3 pixels as good and below about 2.7 pixels as acceptable. With comparison data, the score compares you with other users of the same camera and lens instead.

If it looks wrong

  • A few high points: the camera or tripod probably moved, or something vibrated. Check the setup is stable and run the test again.
  • High values that repeat: this could mean misaligned lens optics or a problem with the aperture mechanism. Run the test again on a different day, or on a different camera body, before drawing conclusions.

Further Details

The Image Motion (2D) chart (in the chart list on the Details tab) shows the same movement as a path across the sensor, so you can see which direction the image moved in.