User Assisted Mode

User Assisted Mode (UAM)

Many cameras don't let a computer change their focus adjustment (AF Microadjustment or AF Fine Tune). For these cameras, FoCal uses User Assisted Mode: FoCal tells you the value, and you set it on the camera.

When FoCal was launched in 2011, it could set the focus adjustment on every supported camera. With the D300s, Nikon removed the ability to set AF Fine Tune from a computer. The earlier D3, D3s, D3X and D700 did allow it, but it didn't work reliably, so FoCal uses User Assisted Mode on all Nikon cameras.

Canon did the same from the EOS 5D Mark III onwards.

User Assisted Mode works like this:

  1. When the setting needs changing, FoCal shows an AF Fine-Tune Change Request (or AF Microadjustment) message and, if voice prompts are on, speaks the value.
  2. You make the change on the camera.
  3. You confirm the change with the camera hotkey (Camera Hotkey) or by clicking Continue on the message (or pressing Return).

With voice prompts and the camera hotkey, you can stay by the camera throughout, so calibration is still quick.

More Details

For step-by-step instructions, see:

Canon – User Assisted Mode operation

Nikon – User Assisted Mode operation