MultiTest

Aperture Sharpness Profile – MultiTest

On this page

(See Chart Features for general chart features - changing scales, copying to clipboard etc)

What this shows

The Aperture Sharpness Profile shows how sharp the lens is at each aperture, for up to four ways of focusing: uncalibrated, calibrated, the ARQS compromise, and perfect manual focus.

How to read it

  • X axis: aperture, from wide open on the left.
  • Y axis: Quality of Focus. Higher is sharper.
  • Red line ("Uncalibrated"): sharpness with the focus adjustment at 0, as the lens comes out of the box. In Live View mode this line is called "Wide Open" and shows sharpness when focused wide open, then stopped down.
  • Green line ("Calibrated"): sharpness with the lens calibrated for best focus wide open.
  • Orange dashed line ("Peak ARQS"): sharpness at the focus adjustment with the best average across all apertures (see Aperture Range Quality Score (ARQS) – MultiTest).
  • Black dashed line ("Manual Focus"): the best sharpness possible at each aperture, if you focused perfectly at that aperture (for example with magnified live view).
  • "DLA" marker: the diffraction limited aperture for this camera. Stopping down beyond it starts to soften the image.

The Calibrated and Peak ARQS lines are only shown when the test uses camera focus adjustment.

What good looks like

  • The green line is at or above the red line. Calibration almost always helps, sometimes only a little.
  • The black line is close to the green line. The gap shows how much sharpness you lose by autofocusing, even with a calibrated lens. A large gap at some apertures means focus shift.
  • Sharpness rises as you stop down, peaks, then falls past the DLA.

If it looks wrong

  • A big gap between the red and green lines: the lens needs calibrating. Use the Best Wide value from the Details - MultiTest page, or run a Focus Calibration.
  • A big gap between the green and black lines when stopped down: the lens has noticeable focus shift. The ARQS value (orange line) gives up a little sharpness wide open for better results stopped down. In the example above, between f/3.5 and f/8 the ARQS value is noticeably sharper than the wide-open calibration.