Aperture Sharpness

Dual-Pixel Raw Focus Offset – Aperture Sharpness

On this page

(See Chart Features for general chart features - changing scales, copying to clipboard etc)

What this shows

The Focus Offset (Dual Pixel Raw) chart shows how far from perfect focus the lens is at each aperture, measured from the dual-pixel sensor data. It only appears when the test was run in Raw mode with Dual Pixel Raw turned on in both FoCal and the camera (supported Canon cameras).

How to read it

  • Horizontal axis: aperture, wide open on the left.
  • Vertical axis: image separation, in microns (µm) on the sensor. If FoCal doesn't know the camera's pixel size, it is shown in pixels instead.

A dual-pixel sensor records two slightly different images (A and B). The separation between them is proportional to how far the image is from perfect focus. A separation of 0 means the image is perfectly in focus.

Key:

  • Red circles: the measured focus offset for each shot.
  • Magenta bars: the confidence of each measurement. The real value is somewhere within the bar.
  • Blue horizontal line at 0: perfect focus.
  • Red vertical line labelled DLA: the diffraction limited aperture for your camera.

What good looks like

  • The widest aperture close to 0. This means the lens was well focused when the test started, so you can trust the other results from the test.
  • Values that stay close to 0 as the aperture closes. A change in offset as you stop down shows focus shift.

If it looks wrong

  • Widest aperture well away from 0: the lens wasn't accurately focused at the start. Run Target Setup again to set focus, then repeat the test.
  • A clear step at some apertures: the lens has focus shift. For the sharpest results at those apertures, focus at the shooting aperture (for example, with magnified live view).

Further Details

The separation describes what happens at the sensor. How it relates to focus error at the subject depends on focal length, aperture and distance. So don't read it directly as a distance at the target. For the same focal length, aperture and distance, values can be compared directly.

In the example above, the f/2.8 value is very close to 0. The lens was well focused at f/2.8, so the test results can be trusted (as far as initial focus goes). There is also a fairly large focus shift at f/4 to f/4.5. This lens may benefit from focusing at the shooting aperture if you want the sharpest possible image at those apertures.

Dual Pixel Raw focus offset is an experimental measurement.